Wood Plank Desk Top Diy

November 29, 2022 Post a Comment

Set your circular saw blade depth to 1/8″ and cut lines along your markings, being sure to include the side of the desk as well as top. Beat up the table as much as you like.

Pallet Wood Desk with Two Drawers and Center Shelf Wood

We used 3/4” plywood ripped from the same board we use as our drawer base, but you can also use a 1×4 board.

Wood plank desk top diy. Here are 34 diy reclaimed wood ideas for you. Mark the lines for your planks using pencil and straight edge. Or try some diy reclaimed wood ideas for organizing potted plants in the garden, making a mail organizer, rustic wall art, or making shelving for pretty much anything.

First apply a thin layer of liquid nails to the 2×4’s that are going to be attached to one another. An inexpensive way to update a desk! Our wood plank covered board simply rests on top of the washer and dryer.

I'm really excited to share this plank tabletop tutorial today. Turn the desktop upside down and work on the bottom to build the frame that will house the drawer. Attach them together and also to the desktop using wood glue and 1.25” pocket hole screws.

After all of your planks are in place, you will install your rim. I decided to check out the offerings at the local lumber yard, and found 2″ x 12″ x 12′ and 2″ x 6″ x 12′ fir framing lumber, priced at $19.01 and $8.05 per piece, respectively. Since i needed two pieces of 2″ x 12″ x 12′ and one piece of 2″ x 6″ x 12″, that’s $46.07 for new countertops!

To make this tabletop you will need: Besides that, we wanted a 1.5” gap between the back of the desk top and the wall for electrical cords. How to build an inexpensive diy wood tabletop | diy wood desk, diy table top, wood diy.

(you can see where i shimmed my planks to line up with the middle section in the photo below.) once the entire desktop is attached, sand it down. Go ahead, get out your aggression. Cover edges, distressed places, your saw lines, and any.

Then we sat the new countertop in place, and adjusted it until the back and side were positioned flush with the walls. We decided to screw the top planks from beneath to. A solid wood desk topper is made from a single plank of wood with no glued planks or layered veneers.

If you look below, the two planks on the far right are just place holders {not screwed in yet}, to keep the end caps spread the proper width. Then predrill holes in the attached 2×4’s before joining them together with wood screws. The cabinets are are 24” deep and the plank top is around 28” deep, so it has an overhang of 2” on the front and the back.

The possibilities are truly endless, and the results will really “spruce” up your space! Watch the video tutorial for details on how to build your own desk just. I needed mine sized for two kids so the 30″ x 60″ piece of wood i already had was perfect.

Diy wood plank table top reveal i shared this picture of our dining room a few weeks back right after we changed out the chandy. How to make a diy wood countertop and how i gave it a tiny bit of “aging” too. Attach the wood planks to the cabinets using a drill and 2 1/2″ wood screws.

If you have a belt sander, it is perfect for this job. To connect the desk frame you will need a drill, wood screws, and wood glue or liquid nails. All you do is screw your 1x2's down around the edge of the table top.

You can make this desk any size you want so the size of the top can vary. I decided to “borrow” the ikea desk top we had lying on top of our washer and dryer, so all in, this project only cost me $39. It’s so much easier than you thought!

Create your very own diy wood countertop and even add a little “faux” aging if you like!

How to Make a DIY Plank Top Ikea Desk Ikea